觀察色差 ：

　　Observe color difference:

　　從不同部位觀察衣服的顏色，檢查是否存在明顯的色差。的工作服顏色應該均勻一致，色差應嚴格控制在標準范圍內。同時，可以檢查布料是否容易褪色。

　　Observe the color of the clothes from different parts and check for obvious color differences. High quality work clothes should have uniform and consistent colors, and color differences should be strictly controlled within the standard range. At the same time, it is possible to check whether the fabric is prone to fading.

　　聞氣味 ：

　　Smell the scent:

　　新衣服通常會有味道，但劣質的材料會散發出刺鼻的氣味，如霉味、高沸程石油味、魚腥味或芳香烴氣味。標準規定，服裝加工產品應禁絕存在這些氣味中的一種或幾種。

　　New clothes usually have a smell, but inferior materials can emit pungent odors such as mold, high boiling petroleum, fishy, or aromatic hydrocarbons. According to national standards, clothing processing products should be prohibited from containing one or more of these odors.

　　檢查外觀 ：

　　Check the appearance:

　　衣服應整潔、平伏，折疊端正，左右對稱。各部位應熨燙平整，無漏燙、無死褶，無線頭、無紗毛。線與面料的色澤、質地和縮水率應大致相同，鈕扣的色澤應與面料色澤相稱。

　　Clothes should be neat, flat, folded neatly, and symmetrical on both sides. All parts should be ironed flat, without any missed ironing, dead wrinkles, loose threads, or yarn. The color, texture, and shrinkage rate of the thread and fabric should be roughly the same, and the color of the button should match the color of the fabric.

　　縫制質量 ：

　　Sewing quality:

　　針距密度應符合規定，明線（包括暗線）的針距每3cm應為14—18針。不同面料應選擇不同的針距，如硬質面料針距可稀一點，質地松軟的面料針距可密一點。縫制應順直，拼接縫應油滑，口袋縫制應方正。

　　The needle spacing density should comply with regulations, and the needle spacing for visible threads (including dark threads) should be 14-18 needles per 3cm. Different fabrics should choose different needle distances, such as thinner needle distances for hard fabrics and denser needle distances for soft fabrics. Sewing should be straight, splicing seams should be smooth, and pocket sewing should be square.

　　檢查規格 ：

　　Check specifications:

　　選擇工作服時，必須按照公司要求的規格進行選擇，尺寸以標準所允許的公差范圍為限。避免因尺寸不符而重新選購。

　　When choosing work clothes, it is necessary to select according to the specifications required by the company, and the size should be within the tolerance range allowed by the standard. Avoid re purchasing due to size discrepancies.

　　檢查襯里和補丁 ：

　　Check the lining and patches:

　　高質量的定制工作服會使用相同材料的面料來增加腋窩的延伸。襯里應均勻，無明顯厚度差異和布線感。腋窩補丁應使用相同材料，以增加舒適度和耐用性。

　　High quality customized workwear will use fabrics of the same material to increase armpit extension. The lining should be uniform, without significant thickness differences or wiring sense. Armpit patches should be made of the same material to increase comfort and durability.

　　手感及強度 ：

　　Texture and strength:

　　通過手感判斷纖維的類別，如棉、麻較硬，羊毛很軟，蠶絲、粘膠纖維、錦綸手感適中。面料應質地細密，顆粒飽滿，紋路清晰，手感舒適，耐磨耐洗。

　　Judging the type of fiber by hand feel, such as cotton and linen being harder, wool being softer, silk, viscose fiber, and nylon having a moderate hand feel. High quality fabrics should have a fine texture, full particles, clear patterns, comfortable hand feel, and be wear-resistant and washable.

　　檢查色牢度 ：

　　Check color fastness:

　　根據相關標準，檢查衣服和布料的色差。色差應控制在一定范圍內，色牢度高的衣服更耐穿。

　　According to relevant national standards, check the color difference of clothes and fabrics. Color difference should be controlled within a certain range, and clothes with high color fastness are more durable.

　　細節檢查 ：

　　Detail check:

　　檢查衣服的鈕扣和拉鏈?zhǔn)欠袷ス鉂苫蛲繉邮欠衩撀?，腋窩、袖口和領口是否磨光、起毛或有汗?jié)n。商標和規格應清晰明確。

　　Check if the buttons and zippers of the clothes have lost their luster or if the coating has peeled off, and if the armpits, cuffs, and collar are polished, fuzzy, or have sweat stains. The trademark and specifications should be clear and concise.

　　通過以上方法，可以有效地辨別工裝定做中衣服材料的好壞。建議在選購時仔細檢查每一項細節，確保購買到滿意的產品。

　　By using the above methods, it is possible to effectively distinguish the quality of clothing materials in custom-made workwear. It is recommended to carefully check every detail when making a purchase to ensure that you are satisfied with the product.

　　以上就是為大家介紹的有關濟南工作服的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們http://www.jiqinzhe.com.我們將以的態度,為您提供服務.

　　The above is a detailed introduction about Jinan workwear, hoping to be helpful to you If you have any questions, please feel free to contact us http://www.jiqinzhe.com. We will provide you with services with a professional attitude